Search this page: CTRL & F keys (or control & Apple keys) at same time to bring up "find" window. Search entire website: use search window at top of page.
Featuring: Canoe Stabilizer System $199 0rder below item 5005 (or item 5026 for stabilizer with hydro-dynamic floats, $299)
Search: Press the "Ctrl" key and the "F" at the same time to bring up a search window (Apple F on a Mac). It will search the page you are on to find the word or words you entered. Click "Find Next" repeatedly until you either find what you want or reach the end of the page. To search the whole website, not just page you are on, enter word or phrase in the search window at top of page and click search. Then use Ctrl-F on any given page.
International Orders
Orders from U.K., Europe (and elsewhere) are welcome. The weak dollar has lowered our prices to you. Shipping costs quoted are for continental US. Canadian sail rig orders please also purchase item 8890 or 8891, which is a flat added charge for most Canadian destinations . Item 1999 or 6009 covers sail rigs to many other countries. Elsewhere, email for shipping cost (sales@sailboatstogo.com). Please include your address and postal code. Hablamos Espa�ol. Canoe stabilizer page including international shipping costs, please click the red words. Warning: Many countries charge taxes on imported goods, which you have to pay to your government; we don't collect these taxes. Ask your customs service or post office.
Contact Us
Email: Jim@sailboatstogo.com Tel: 508 859 0883 or toll free at 1-888-JOY-SAIL Skype name: James.Luckett (You can use following buttton if you have Skype.)
Location: 120 Avebury Circle, Boxborough, MA 01719 (call first)
Super Snark Sailboat and Sunflower Owners
You've already got a sail, mast and spars that will work with our rigs and inflatable sailboats, so send us an email and we'll sell you the rest for $250 off. Sales@sailboatstogo.com When that Snark stryofoam hull dies, consider replacing it with an inflatable hull or a canoe. Even while the Snark hull lasts, it will be fun to have different hulls your sail will work on. The inflatable and the canoe hold more people and offer more comfort (back support!) and keep you dryer (sail even in the Spring and Fall!) so we think you will find they really enhance your enjoyment. We are also Snark dealers, so if you want a Snark sailboat or any parts for Snarks, we're here to help: click the red words.
Many Different Ways to Order and Pay -- You Decide
Use the "Buy Now" buttons and pay by credit card. (All of our credit card orders are processed over a 128 bit Secured SSL connection, ensuring that your personal data is safe. We will never sell your information or use it for any purpose other than completing your approved transaction.); Or...
You can do it the old fashion way: Write what you want on a piece of paper and send it with a check or money order to SailboatsToGo LLC, 120 Avebury Circle, Boxboro, MA 01719.
Stabilizer Floats (foam) and arms for Our Sail Rig or Rowing Rig Ethafoam floats on aluminum outrigger arms that slide into the main crossbar of the sail rig to help keep you from tipping over. Mostly for canoes and kayaks, but also work on inflatable dinghies with our sail rig if you feel the need. The inflatables dinghies are very stable even without them, but not impossible to tip. To use on canoe, without buying sail rig, order our "Stabilizer system: Floats + Crossbar + Clamps" (listed on both parts and canoe rig pages, item 5005). The item #1000 canoe kit already has these included. For motoring or sailing, consider item #1006 hydrodynamic style or the inflatable style instead.
Conversion Kit - Canoe Sail Rig to Inflatable Sail Rig This package contains all the parts necessary to cross-fit your Canoe Rig to a Sevylor or other compatible inflatable! Increase your sailing opportunities! Great for teaching kids to sail. Grownups love the comfort and convenience of inflatable sailboats. Order inflatable boat separately on our "Boats" page (just click "Boats" tab at top of page). Boats available under $100.
Hydro-Dynamic Stabilizer Floats & Arms (slide into crossbar of a sail or rowing kit) Longer and more streamlined than the foam floats. These are pontoons on telescoping arms that can be added to most of our sail rigs and rowing rigs to help prevent capsizing. This is an accessory for a sail kit or rowing rig that has a crossbar these can slide into. See item 5026 for a complete stabilizer including crossbar and gunwale clamps. MORE DETAILS CLICK HERE
High Seat - Special add-on canoe seat A great canoe sailing accessory. Two benefits: (1) Gives you a high, wide bench seat so you can easily shift your weight side to side to counterbalance the force of the wind and keep the canoe upright; (2) Lets you put your seat where you want it, to improve bow-to-stern balance, especially good for solo sailing to keep the bow down. When you have the freedom to shift your weight all the way over to the windward side and even a little beyond, it adds a whole new dimension to canoe sailing. Your skill in balancing the canoe will add to your speed and your fun. Also works great as a table or workbench on the water. Approx 8" x 36" . Full page of details Click Here Caution: Use with Hydrodynamic stabilizer floats or accept greater risk of capsizing due to higher center of gravity.
Inflatable stabilizer floats and arms Rugged, yet more portable than our other stabilizer floats because they deflate. Very puncture resistant and they inflate quickly and easily with just a few puffs by mouth -- no need to carry a pump. They have one-way valves, so blow in as hard as you can to top them off and then take your time screwing the cap on. The one-way valves will keep the air from rushing back out and since they can take all the pressure your lungs can give them, you can inflate them hard. They have dual side-by-side mounting rings that attach them to their aluminum arms, so they are firmly held pointing straight ahead. This item is not designed with the up/down adjustment. This item is just floats and arms for adding to a sail kit, rowing setup, or other product that already has crossbar for them to slide into. See next item if you want that up/down adjusting inflatable floats. For sailing, you use floats in all-the-way-up position anyway, so if that's the intended use of your stabilizers, you don't need up/down adjustment. Click Here for Video -- But note float arms are straight, silver color and longer than those in this video Customer writes: 'I LOVE IT'
Hi Jim!
Sailed for the third time on the setup today. Sails GREAT! I LOVE IT!
Very lively winds today, 12-16 knots at times. Boat handles great under sail, glad I got the inflatable stabilizers for sailing solo. (The hydrodynamic ones would be great but I needed everything to be RV packable.)
Posted a short 'headcam' YouTube video...http://www.youtube.com/watch?v=X-6q9mNmPaY
http://www.youtube.com/watch?v=X-6q9mNmPaY
Thanks,
Frank K. (May 2010 -- put our sail kit on a Sevylor XK17 inflatable kayak)
Upgrade stabilizer floats from foam to inflatable Add this item to your cart only if you are also buying a sail kit or other item that normally comes with ethafoam floats. This item deletes the ethafoam floats from your product and adds inflatable stabilizer floats and arms as described above at item 1013. For shipping to foreign countries, use the "without stabilizer floats" shipping cost because these are so easy to ship.
Canoe Side Rudder - complete with mount Now you can use a conventional rudder even on a canoe and it doesn't have to be a square back canoe. This rudder unit works like a canoe motor mount: Crossbar clamps across the gunwales and sticks out on one side, and rudder pivots off the crossbar. This is the complete unit: crossbar, rudder mount, gunwale clamps, rudder & tiller.
Side Rudder to be used with steering oar crossbar If you already have or are ordering the complete canoe sail kit and want to have the additional option of steering by side rudder, order this item. It comes with a rudder mount that attaches to the steering oar crossbar of the canoe sail kit. It does not have its own crossbar and gunwale clamps (see item 1018 for unit with its own crossbar and clamps). It does not prevent use of the steering oar. Selecting this item will not delete anything from a canoe sail kit ordered at the same time (it is not a substitution item - see item 1019 to get rudder as a substitution).
Pair of hyrdodynamic stabilizer floats This includes just the pontoons (floats) and the vertical float tubes for the hyrdrodynamic canoe stabilizer system. This would be for a do-it-yourself project or for retrofitting a foam stabilizer with the hydrodynamic floats. Note that if you have a really old stabilizer you are upgrading, from before hydrodynamic floats were offered, you will need the float arms too, because the clamping mechanism at the ends of the float arms was upgraded to clamp the vertical float tubes more tightly. In that case order item 1006 (float and arms) instead.
WindPaddle Cruiser - Larger Downwind Sail Larger version of the WindPaddle Adventure (item 1015). Round sail you simply set up in front of you and tie onto your boat -- no installation necessary. Folds and stows in a compact package. Blue & white red & white or yellow & white -- email Jim@SailboatsToGo.com or call 978 263 7598 to specify. If you don't specify, we'll make a random color selection. MORE INFO CLICK HERE
Duffel Bag for Mariner Floor or Canoe Cart Makes Carrying Mariner Easier. Divide the load between boat bag (comes with boat) and this bag for roll-up floor. Now you have two 40-lb. bags instead of one 80-pounder! This bag is also good for carrying the folding canoe/kayak cart.
Conversion Kit - Inflatable Sail Rig to Canoe Sail Rig (No Floats) Additional parts you need to use your inflatable boat sail rig on your canoe.
Maximize your versatility! This item consists of 4 gunwale clamps and a pair of sliding leeboard mounts, plus instructions. You probably also want to order stabilizer floats and arms.
Pump, oars, & sail kit carrying bag This item comprises: (1) the large bellows footpump, (2) pair of Sevylor aluminum shaft oars and (3) a duffel bag for storing and transporting the inflatable sailboat sail rig. This item is for buyers of sailboats based on the Sevylor Caravelles and Super Caravelles. The Intex boats come with pump and oars.
Sliding leeboard mount converters (Pair) Allows you to adjust position of leeboards on our "Any Kayak", and inflatable boat sail kits (excluding kits for Pakboat, SVX200, Saturn & similar, where mast position is adjustable instead). Following the instructions provided, you will be able to fine-tune your rig for the combination of hull, sail, sailing conditions and preferences you have. Farther forward gives slightly better upwind performance. Farther back (up to a point) gives less drag and less effort on steering oar to hold course going straight ahead. Too far back gives control problems. Adjustable positioning allows you to adapt rig to wider variety of boats, and to your desired handling characteristics. The inflatable rig and the kayak rig work on rigid canoes if you get sliding leeboard mounts and 2 pair of gunwale clamps. (Canoes need the leeboards farther forward than the standard fixed position for kayaks and inflatables). Changing leeboard position with these sliding mounts requires no tools and can be done in a few seconds provided you aren't also trying to sail the boat at the same time. Do on shore or let your passenger do it for you, so you are not distracted from your duties as skipper!
Leeboard extensions (pair) for boats with more than 16-inch tube diameter Adds about 6 inches to length of leeboard arms. Necessary for boats with over 18-inch tube diameter..
Electric Air Pump - Power Inflator 12V DC works off car cigarette lighter We tested many inflators before choosing 2 to sell. This is the quietest one we tested. Plugs into cigarette lighter. Has hose and adaptors for different size valves. Will inflate 11' Super Caravelle or Mariner in about 10 minutes. You don't have to hold it, so while main chambers are filling, you can be getting the rest of your gear arranged. A few puffs by mouth required to top off each chamber. You can do these puffs into the end of the hose (it detaches from pump), so you don't have to pucker up right against the boat. If you want option for cordless operation, get item 2016 instead. However, only this pump can be reversed to help deflate the boat. Squeeze most of the air out by rolling or folding, then suck the rest out using this pump to get your boat as small as possible for convenient transporting and storage. For deflation, you do have to hold the hose in the boat's orifice and block leakage around the hose with your hand, but this is easily and quickly done and the deflation function is very effective.
Cordless Electric Air Pump Inflator We tested many inflators before choosing which to sell. Works cordlessly on it's internal rechargeable battery, charges from AC outlet. Has a hose, which is a big benefit -- otherwise you have to stand there and hold the inflator. The whole point of a power inflator, we think, it to be able to be doing other things while it's working! Will inflate most boats in about 10 minutes. There is plenty of juice in the rechargeable, even at the end of inflating a whole boat, unlike some other rechargeables we tried. A few puffs by mouth required to top off each chamber. You can do these puffs into the end of the hose (it detaches from pump), so you don't have to pucker up right against the boat. Or use a hand or foot pump for a few strokes. If you want a lower price and don't care about cordless operation, get item 2015 instead. Also helps you deflate the boat.
Rowing outriggers and clamps for Cat2Go (Haiku Pontoon Boat from Clear Blue Hawaii) Rowing is great exercise and faster than paddling. Take the sail kit off, use your 2 ruddering oars and the front crossbar, along with these rowing outriggers, to really row hard and strong in your Cat2Go. This is not to be used with sail installed; it's a whole 'nother life for your cat!
If you don't have our sail kit, then you also need to order a crossbar and some oars.
Motor mount for Navigator II & III Motor mount for the Navigator II 500 and Navigator III 400. You can sail with motor mount installed IF (a) you have side-steering-oar steering (not center rudder) and (b) you purchase optional clamps to sail with motor mount (item 3022).
Kayakers accessory package - paddles, pump, bag We put this together especially for the Aire Tomcat and Trinity II, but it would be good for other boats too. It consists of: 2 good quality paddles (take apart fiberglass shafts, fairly light) from Clear Blue Hawaii, a bag with shoulder straps for carrying the deflated kayak (from Sea Eagle), and a Bravo 9 foot pump, which is a really good foot pump. The price is based on $75 each for the paddles, $45 for the pump and $39 for the bag.
Compact Carry Bag - fits sail rigs This handy duffel bag is custom made to fit all the parts for the inflatable boat sail kit or kayak kit (excluding pontoons). And, the bag is within the allowable dimensions for standard bags on the airlines. Actual bag is even better than pictured: It is gray and has shopping bag handles in center, made of strong webbing, in addition to shoulder strap. Dimensions are 47" x 9" x 7" with full-length zipper and shoulder strap. The standard leeboards will creat a bulge in the bag that will make it over 9" wide at that point. If you want to avoid that bulge, get the item 5092 leeboard upgrade to the longer, skinnier leeboards.
Alternatives: We have a larger bag -- see item 6005, with room for extra gear or for stabilizer floats. We've flown with it many times and never been charged extra due to its size. Or item 3031 is a lower-priced alternative without shoulder strap.
Motor mount for Intex inflatables New style. Fits Mariner, new Seahawks and the Excursion. Boats needing old-style motor mount for the Seahawk Sport 400 and all pre-2005 Seahawks see item 3020.
Also, for all models, Order item 3022 to attach steering oar unit to motor mount supports if you want to sail with motor mount installed.
Motor mount for Intex Seahawk Sport 400 etc. Adapts the current Intex motor mount to fit the Seahawk Sport 400 and other pre-2005 Seahawks that have motor mount fittings. This item includes the 3015 motor mount and a set of adaptors to make it work on older Seahawks, including the Sport 400, provided they have motor mount fittings.
Explanation: The motor mount for the current Intex boats won't fit the Seahawk Sport 400 and other older Seahawks. But, with the adaptor we have created, it will fit just fine. For this price, you get motor mount and adaptors.
Book On Learning To Sail -- Jim's Favorite We've read them all (almost) and this is the best "How-To-Sail-For- Beginners" type book out there. It's the one used by the Annapolis Sailing School. It's got one female author and one male author, so both halves of our species were represented in its creation, which for a "how-to" book is a good thing.
Jim Luckett says: "It's clear, well written, well illustrated, and correct."
We do provide "How To Sail" instructions (written and illustrated by Jim himself) with our sail kits, plans, and sailboats, but if you like to have things explained 2 different ways to help make them stick, read this book too. Paperback.
Clamps to sail inflatable with motor mount Motor mounts use the same fittings we use for normal attachment of the steering oar unit, so trying to use both at once presents a conflict. This item resolves that conflict by allowing you to attach steering oar unit to motor mount supports. Enables you to sail with motor mount installed. Consists of a pair of stainless steel u-bolt assemblies & instructions.
Sail Kit Carry Bag (Medium) Sturdy carry bag will keep all the parts of your sail kit together and make them easy to transport (stabilizer floats excepted). Bag is a little bigger than our item 3012 bag so the standard leeboards will fit and you don't have to be as careful to arrange things to get everything in. If you want a bag large enough for stabilizer floats in addition to a sail kit, get our 6005 bag, or get two of these bags (item 3032 is a discounted price for 2). This is not a shoulder bag. Has hand-carry handles only. Zipper closure. We haven't listed any shipping cost on this item, because it's free shipping if bought with a sail kit or stabilizer. If purchased on its own, we will add $7 for shipping (will not show during checkout, however). Customer comment: "Jim, the bag just arrived. It is beautiful and probably about 50% under-priced for what it is. Beautifully made; reinforcements in all the right places; heavy duty zipper; beautiful sewing job on the red piping; just a terrific package... Be well and take care and thank you once again for producing such a teriffic product."
--customer Alan S. March 2010
Two Carry Bags at a Discounted Price See item 3031 for description. This is 2 bags at a discounted price. Free shipping if bought with a sail kit. Otherwise, $10.
Free inflatable sailboat plans because I am buying a sail or spars today. If you buy a sail or spars from us today, you can have a set of plans for just the shipping cost. This option only valid if you buy sail or spars with this order.
Canoe sail rig plans and how-to-build video free because I am buying sail or spars today. If you buy a sail or spars from us today, you can have a set of canoe rig plans and instrucional video for just the shipping cost. This option only valid if you buy sail or spars with this order.
Side-saddle Canoe Motor Mount Clamps to one side of the canoe and has no crossbar. Only fits canoes with thick gunwale lips like Old Town. MORE MOTOR MOUNTS CLICK HERE People have adapted it to other canoes with home-made blocking or shims added, but we cannot advise you on this. If you have an Old Town or similar canoe, this is a great solution. For most other canoes, go with the Super Strong Motor Mount (item 5053) or the Hinged Motor Mount (item 5052). For electric trolling motors and gas motors up to 3 HP. Works on either side. Stabilizers recommended when motoring any canoe with any motor mount to prevent capsizing (item 5118). Questions: Jim@sailboatstogo.com 1-978 263 7598
Substitute Snark Sail into a sail kit or sailboat order Buy this item to delete the 45 SF sail included with a sail kit or boat you are buying from us and substitute the authentic "Snark" sail described at item 4999. Works on canoe, kayak and inflatable boat sail kits we sell. This is only to be used for substitution. To buy this sail not as a substitution, see item 4999.
Super Snark sailboats come with an authentic Snark sail (this design or another by Snark) and no substitution is necessary when ordering them.
Snark sail - 45 SF Nylon red/blue/yellow- also fits our rigs Authentic Snark brand sail to fit the Sea Snark or Super Snark. Has a bold red center panel running diagonally, bordered by blue and yellow panels above it and below. "SNARK" is printed in large letters in lower aft corner. It's a little more money than our other sail that fits the same boats (item 5001) but it offers a different color scheme plus the SNARK logo. Quality of the 2 sails is equal.
Mast, spars & nylon sail - fits our rigs, Spring Creek, Sea Eagle All 3 items on one "buy now" button for ease of ordering. Also includes our innovate "mast slide" which is the fitting that connects boom to mast and allows it to swivel. The spars (sailor talk for the boom and the other long tube at the front of the sail) and the mast fold for easy shipping and easy storage and transporting. These are parts, not a complete sail kit. See one of our sail kit pages (inflatables, canoe kit or kayak kit), accessed with tabs above, for complete sail kits. Start with "catalog" tab. Will fit Super Snark, Sea Snark and Sunflower if you remove the boat's mast sleeve (mast diameter is 1 1/4" vs. Snark's 1 1/8").
Sail - 45 SF nylon multicolor for Snark and our rigs. By Priority Mail. This is the sail only (no spars or other metal parts). Multi-colored. This is a true, aerodynamic, shaped sail, which means it is cut and sewn to have the necessary camber (3-dimensional curvature) for creating aerodynamic lift. Superior in power and efficiency to "flat triangle" sails offered elsewhere. Strong fabric and strong sewing, so it will last. Small SeaEagle.com logo at lower front edge. Ships by USPS so PO boxes are okay and please ignore any warnings to the contrary during checkout process. More Info
Sail 45 sq ft dacron Custom made 45 SF sail in Dacron fits Snark, SailboatsToGo, Spring Creek and Sea Eagle boats. Excellent workmanship and high quality materials. Dacron is theoretically more efficient at converting wind to boat-moving power than any other fabric, but we don't see a measurable difference in a head-to-head race with our standard nylon sail. These are made after they are ordered, so allow about 3 to 6 weeks. Wide choice of colors (Red, white, 3 shades of blue, turquoise, green, yellow, 2 shades of orange, purple, gold, black, gray, tanbark, pink) and the 4 panels of the sail can be different. Not returnable unless defective. If you want this sail INSTEAD of the standard sail in a sail kit or sailboat you are ordering today, choose item 5017 instead. Item 5017 is for substitutions (upgrading something you are buying today). This item is for buying the sail on its own (not as a substitute). Sail color page .
Spar set - boom, top spar, mast slide for our rigs, Sea Eagle, etc. Segmented (3 sections each) and shock-corded inside, so they folds to 45 inches, but the parts stay together. You fold it with the sail still on the spars, for fast setup and take down. Fits our rigs, Sea Eagle, SOAR too. Mast slide is on pivot, so sail can be furled and stored vertically against the mast, held up by the halyard, without taking the mast slide loose from the mast. Spars are aluminum, for light weight and strength. Plastic loops riveted in place on spars to locate halyard (rope for raising sail) and sheet (rope for controlling sail).
Mast - aluminum, 2 part Mast for Canoe sail rig or inflatable sailboats. Segmented and shock-corded inside. Loop at top for halyard. Strong. Fits, Sea Eagle, SOAR, Spring Creek, too. Outside diameter is 1 1/4" which is 1/8" larger than Snark. See item 5018 or 5019 for Snark mast. You can use this mast in a Snark if you remove boat's mast sleeve.
Canoe stabilizer system: Foam floats + arms+ crossbar + clamps = stability! Please email us after ordering to specify canoe width & brand. Canoe stabilizers: Crossbar clamps to your gunwales. Outrigger arms slide into the crossbar tunnels and snap into place; can be slid all the way in to bring floats tight to hull for getting into tight places. Float height is adjustable: Up for sailing or paddling, down to the water for fishing, swimming, etc. These really work, even when going fast (see the video! Click link on Canoe Rig page). Lighter and more portable than competitors' products, yet rugged and effective! Click photo to englarge. See more photos on our "Gallery" page (click tab at top right). There is a "more details" link on the "Parts" page that takes you to a whole page just on stabilizers. Our canoe stabilizers are great for fishing, sailing, and peace of mind! Please email us after ordering and specify 30", 36", 40" or 45" crossbar (your canoe width + 2" and round up). If canoe gunwale lip is on the outside, add 4" to canoe width. Email: Jim@sailboatstogo.com Also available with "Hydrodynamic" floats -- larger, more streamlined, hard tough plastic at added cost. more info click here
Canoe wheels - fits canoes with sail rig or stabilizer system Quickly attaches to or detaches from main cross bar of the canoe rig or canoe stabilizer system. Just roll your canoe down the trail to the water's edge. Don't have a stabilizer or canoe sail kit and don't want one? Buy crossbar and clamps to accept wheels (item 5034). 16" diameter, fat tires for easier rolling in sand or soft ground -- like the tires on a contractor's wheel barrow. See item 5063 for same thing but with thinner, 12" tires. Spring Creek brand.
motor mount for Sevylor 9 - 12' Caravelle & Super Caravelles This is what you need to add an outboard motor to your Sevylor Caravelle, Super Caravelle, HF280 or HF 360. Mounts to the motor mount fittings on the boat. If you want the steering oar crossbar of our sail kit mounted at the same time, so you can sail, buy item #3022 clamps.
Bigger Sail Upgrade -- 55 square foot nylon sail, heavy duty mast, spar extension Select this item to DELETE the 45-square-foot sail from your order of a sail rig or complete sailboat and SUBSTITUTE a 55-square-foot nylon sail. Includes spar extension to carry the larger sail, plus sail, plus free upgrade to heavy duty mast. Bigger sail provides more speed in light to moderate winds (5-12 mph). Not for winds above 18 mph. This price is only for substitution. Choose sail colors:
Click Here If you are not ordering something that normally includes a 45 sf sail, you must use item 5012 instead for this item.
See item 5060 for a luxury alternative: Upgrade from the standard sail to a custom-made dacron sail in your choice of colors. Or, see item 5149 for a ready-made all-white Dacron sail alternative.
55 square foot sail and spar extension, plus mast upgrade Add a second sail to your sail kit so you have a choice of sail size: This item is a 55-square foot sail and a spar extension that snaps onto our spars so they will accept the larger sail. Larger sail gives you more speed in light to moderate winds (5 - 12 mph). Select item 5011 instead if you want to substitute this sail for 45 SF sail. Select this item to get the larger sail without deleting 45 SF sail. Heavy-duty mast upgrade included (must have a sailkit or a standard mast in same order to qualify for upgrade).
More Pictures Click Here Consider getting a second spar set so you can keep both sails mounted on spars for quicker change over (item 5003).
Carry bag for boats Sturdy nylon duffel with shoulder strap fits any of the Sevylor Caravelles, Super Caravelles. For the HF360, use this item number but email us and ask for the next larger size (same price).
Waterproof case for cell phone, GPS, small camera A cell phone in a waterproof bag could be the most important piece of safety equipment on your boat. Bring a GPS along and clock your speed, chart your heading and bearing, and measure your upwind sailing ability.
A small camera might fit.
Measures 2 1/2" x 7" x 1"
More Info
Heavy duty mast upgrade Twice as strong on the bottom half of the mast, so you can keep the sail up high even in stronger winds. With the standard mast, when the white caps appear, it's time to lower the sail a foot to reduce strain on the mast. Only a pound heavier. Still fits in the optional rig bag. Not shock-corded. Pieces lock together with spring button instead. This price is to substitute this mast for the standard mast when ordering a rig. Don't put this in your shopping cart if you are getting it free with upgrade to 55 SF nylon sail. Just email jim@sailboatstogo.com to say you want the free upgrade in that case. Fits Super Snark, Sea Snark and Sunflower if you remove boat's mast sleeve.
Upgrade Sail to Dacron 45 SF -- allow 3 to 6 weeks for delivery Order this item to delete the nylon sail from your sail rig order and substitute a 45 SF dacron sail. Made to order so you choose the color or colors. Dacron marginally outperforms the standard nylon sail in terms of power & upwind sailing ability, but we don't really see much performance difference in our test. This is offered for the real sailing enthusiast who is willing to pay extra for a extra quality and a wide choice of colors. Sail color page .
Snark Mast - for Sea Snark or Super Snark - only $15 shipping! Replacement mast for Super Snark or Sea Snark. 84" tall, just like the original. 2-part, snaps together. Here is another option to consider: Our masts for the canoe, kayak, and inflatable sail kits will also work on Sea Snarks, Super Snarks, and Sunflowers if you remove the metal sleeve on your boat that receives the mast. Our other masts are 1/8" inch fatter in diameter than Snark masts, matching the outside diameter of this sleeve. Our item 5004 mast is 87" tall, so it will give you 3 inches more headroom under the boom, and the price is lower. Our item 5039 mast is adjustable up to 102 inches, so it gives quite a bit more headroom, but the price is higher.
Canoe leeboards mount to stabilizer crossbar Canoe leeboards mount to same crossbar as stabilizers (outriggers). Leeboards are large blades that slice through the water making it easier to go straight and harder to get pushed sideways by the wind or erratic paddling. Includes mounting fittings and knob bolts to attach to crossbar of our stabilizers (outriggers), so you can use both at once. Leeboards swing back and up if they hit submerged obstruction or beach. Already included in sail kits.
Float rod extensions for stabilizer (outrigger) floats Pair of extension that increases the range of adjustment possible for height of the stabilizer floats. Without extensions, floats have 5 inches of vertical adjustment, which is enough to reach the water on most canoes. If your canoe is more than 14 inches deep, or if you want to force the floats down to press harder on the water for greater stability when stationary, these will increase the range of adjustment up to 10 inches. You cut to perfect length for your application. Free shipping if ordered with other item. Otherwise add $8 via custom payment (item #8888).
Swiveling Mast Slide or gooseneck Bolts to boom (bolts and nuts included) and accepts mast up to 1.375-inch outside diameter. Included with our spar sets and sail rigs, but offered here separately for those who want to use in conjunction with plans, or who may want to upgrade Snarks and older Spring Creek Canoe sail rigs. The swiveling feature is unique. It lets the boom swivel up all the way vertical where it can be stored out of the way against the top spar and mast. Video: Click Here
Spar Set for Super Snark/Sea Snark - low shipping cost! Stronger than original equipment, yet our spars fold so they're inexpensive to ship and convenient for you to store and transport. Carry your sail in the trunk, not on the roof, because you can fold and unfold the sail while it's on the spars, with our spar system. Folds down into 4-ft. long bundle. Aluminum.
55 SF Sail, nylon, yellow and white This sail fits our sail rigs if you have the spar extension already. If you don't, order sail with spar extension (item 5012).
Approximately 11'8" on the luff (the almost vertical, forward edge) and about 9' 8" on the foot (bottom, horizontal edge). Yellow and white.
Canoe Stabilizer with Hydro-Dynamic Floats - Please email canoe width & brand to Jim@sailboatsToGo.com after checkout. Our extremely popular canoe stabilizer, but with longer and more streamlined floats than the classic foam floats. The foam floats are lighter and shorter and priced lower. So, they are more portable and more affordable. But these are stronger and create very little drag and very littls splash, so they are much better for sailing or motoring. Item 5118 is same thing with a handy carry bag. more info click here
Kayak stabilizer with Hydro-Dynamic Floats Same as our classic kayak stabilizer, but with longer and more streamlined "Hydo-Dynamic" floats. The foam floats are lighter and shorter and priced lower. So, they are more portable and more affordable. If you think of stabilizer floats as insurance, and you don't intend to drag them through the water, but instead plan to have them above the water ready to catch you if you start to tip, then you don't care about drag. But if you are going to be leaning over enough to have a float in the water while moving, then these longer more streamlined floats will cause less drag.
Upgrade Stabilizer Floats to Hydro-Dynamic Adding this item to your cart will upgrade the floats on a sail kit or stabilizer system that is already in your shopping cart from foam floats to hydo-dynamic floats. Hydo-dynamic floats are longer and more streamlined than the standard foam floats. So, they cause less drag when going through the water. They are also stronger in their ability to stay pointed straight ahead despite the forces exerted against them by motoring or hard sailing. Users who keep their floats out of the water when moving most of the time, so drag is not a consideration for them, should not spend the extra money to upgrade. You must have another item in your shopping cart that has foam floats in order for this item to have something to upgrade. MORE DETAILS CLICK HERE
Clamp-on Rudder Mount For Hard-Transom Boats Drop this on your boat's transom, turn one knob, and you're ready for our rudder. Rudder mounts to it just by sliding pin through the eyes on the rudder mount and the eyes on the rudder. For Zodiac-type hard-transom boats and rigid fishing boats. Not required if you're willing to install eyebolts directly into your transom, but this accessory eliminates need for drilling. FOR DETAILS CLICK HERE
Rudder itself is included with rigs for Zodiacs and one of the fishing boat deluxe packages (item 7002), or purchase separately (item 7003).
Rowing Outriggers for Canoe Gives you oar pivot points farther apart than width of the canoe, for better leverage when rowing. Requires crossbar and gunwale clamps from our canoe stabilizer or canoe sail kit. One end of each rowing outrigger snaps into crossbar. Oars, seat, crossbar sold separately. Accepts 1/2" diameter oarpin (same as the pin on our steering oars). If you need crossbar and clamps (i.e., maybe you are getting a sail kit, but don't want the rowing setup to share parts with the sailing setup) they can be ordered separately.
Steering Oar & Oarpin Flat-bladed 7' oar with clamp-on oarpin. Use with our sail kits and canoe rowing attachment. Sail kits come with one, but you may like to have a second one. It's very convenient, when sailing, to have steering oars on both sides. You don't use them both at once for steering, but it allows you to steer with either hand without having to shift the steering oar from side to side.
Add-on Canoe Seat Add a canoe seat quickly and easily with this clamp-on design. Low center of gravity. Good as rowing seat with our rowing attachment, or add a seat anywhere on the canoe for passenger or center-position solo paddling. Telescopes from 32 to 38 inches to fit most canoes (special orders for other widths possible). You sit on durable, comfy ethafoam. With clamps.
Spoon oars with oarpins Pair of oars with efficient spoon-shaped blades for use with our canoe rowing outriggers. Order, then send us an email at jim@sailboatstogo.com specifying 7' or 7.5' length.
Canoe crossbar and gunwale clamps Aluminum clamp-on crossbar with two square tubes in it that accept our stabilizer float arms, pop-in leeboard mounts, and/or rowing outriggers. Pre-drilled for the spring-buttons that lock in the attachments. Pair of gunwale clamps included. Standard lengths are 30", 36", 40", 45". Email Jim@sailboatstogo.com and specify length after you order. Custom lengths possible. If you have our canoe stabilizer or canoe sail kit, then you already have one of these.
Complete Rowing Package without stabilizer floats (email canoe brand & model to Jim@sailboatstogo.com after ordering) Complete Rowing Package (rowing outriggers, crossbar with gunwale clamps, seat #1 and spoon-blade oars) without stabilizer floats. Ready to accept our stabilizer floats if you want to add them.
Steering Oar Setup for Zodiac-type Boats If you want to sail but also have your outboard mounted on the transom and ready for action, then you can't mount our rudder on the transom. But here's an alternative to the rudder. This set consists of pivot blocks that strap to your air chambers aft of the transom, and an extra-long steering oar with fixed oarpin. Allows you to steer on either side. More Info Click Here
Motor Rudder short rudder head and u-bolt If you want to sail your Zodiac-type boat with our #2009 sail rig, but also keep your outboard on the transom, one option for steering while sailing is to mount the rudder blade to the motor. All you need are: (a) This short rudder head and included square u-bolt, (b) the rudder that comes with the #2009 sail rig, and (c) an outboard stabilizer plate you obtain elsewhere ($59 - we'll tell you where) . The short rudder head subtitutes for the standard long head and tiller that comes with the #2009 sail rig. For explanation, pictures, and link to vendor of stabilizer plates click here
55 Sq. Ft. Nylon Sail and Spar Extension Go faster when the winds are not strong. This yellow & white 55 SF sail fits any of our sailboats or sail rigs, by adding a spar extension (included with sail). Heavy duty mast is highly recommended with this sail, unless you are sure your winds will always be light. If you want to substitute this sail for the standard sail on something you are ordering today, then order item 5011 instead. Item 5011 is for upgrading. This item is for buying the sail on its own.
Heavy duty mast Heavy duty mast fits our sailboats and sail rigs, Spring Creek and Sea Eagle Paddleski. Bottom section (which takes most strain) is twice as strong as standard mast. Use this item to buy the mast not as an upgrade.
Use item 5016 instead to upgrade the mast on a sailboat or sail rig you are ordering today. (Note: Mast upgrade is free is you also select item 5011, upgrade to larger sail, and select the nylon sail option).
Snarks: This mast will fit Sunflower and Snark sailboats, if you remove the boat's mast sleeve. Masts that are 1/8" smaller in diameter and therefore designed to fit inside the Snark mast sleeve are listed separately.
Sunflower Replacement Sail - Yellow & white Replacement sail for Sunflower Snark sailboat. Approximately 11'8" on the luff (the almost vertical, forward edge) and about 9' 8" on the foot (bottom, horizontal edge). Yellow and white. Check your Sunflower -- a few of the oldest ones actually use the Super Snark sail, not this one. To use this one, one spar must be longer than the other. If they are equal in length, order item 5001 instead (Super Snark sail, 45 SF). Alternating yellow & white panels.
Canoe gunwale clamps - email Jim@sailboatstogo.com & specify small or large For clamping crossbars to your canoe. Send email to Jim@sailboatsToGo.com specifying large width clamp (about 3" between the legs of the u-bolt) or small (about 1.5").
Tip: With a pair of small clamps, a drill and a board, you can make the rough equivalent of our gunwale seat and save some money.
55 SF Sail Rig for Nauticraft Escapade Sail, mast, spars, and mast socket for Nauticraft Escapade. 55 S.F. yellow and white sail. LINK For Details Click Here
45 SF Sail, Mast and Spars for Nauticraft Escapade Like 5042 except sail is 45 SF and red/white/blue/yellow. Sail, mast, spars, and mast socket for Nauticraft Escapade. LINK For Details Click Here
Spars for Sunflower 55 Sq. Ft. Sail Folding spar set for Sunflower 55 Sq. Ft. sail. Stronger than original Sunflower non-folding spars, and saves on shipping. Includes swiveling mast slide (fitting that connects boom to mast)
Mast and sail not included but available separately. Item 5019 is the mast for a Sunflower sailboat and item 5039 is the mast for our sail rigs. Item 5040 is the 55 Sq. Ft. sail for Sunflowers and our rigs.
Ethafoam 4-float canoe stabilizer - Email Jim@sailboatsToGo.com and specify crossbar length needed. Double your stabilizer flotation with the 4-float canoe stabilizer. This is the Ethafoam style.
4-float Hydrodynamic Canoe Stabilizer - Email Jim@SailboatsToGo.com & specify length of crossbar . Double the flotation with 2 floats on each side. This is the hydrodynamic style 4-float stabilizer.
4-Float Ethafoam Canoe Stabilizer with Link Arms Adaptor - Email Jim@SailboatsToGo.com and specify crossbar length desired. 4 Ethafoam floats AND the Link Arms adaptor that lets the second float on each side piggyback on the arm of the first float so that it can be almost twice as far from the boat. (Note extreme extension is for going slowly or staying in one place, only).
4-Float Hydrodynamic canoe stabilizer with Link Arms adaptor - Email Jim@sailboatsToGo.com and specify crossbar length desired. Double the standard number of hydrodynamic floats AND the Link Arms adaptor that allows the second pair of floats to piggyback on the arms of the first pair of floats so that they are almost twice as far out from the side of your canoe for amazing stability. Double the flotation. Double the distance (almost). (Note extreme extension is for going slowly or staying in one place, only).
Mixed 4-float stabilizer with Link Arms adaptor - Email Jim@sailboatstogo.com and specifiy crossbar length. 4-float stabilizer with a pair of each type of float (hydrodynamic and ethafoam) and the Link Arms adaptor to offer the option of extending the spread between the outer pair of floats. (Note extreme extension is for going slowly or staying in one place, only).
Link Arms adaptor and extension float arm Extend the spread between your stabilizer floats with our Link Arms adaptor and an extension float arm. 1 pair. (Note extreme extension is for going slowly or staying in one place, only).
Motor mount for Canoe - Hinged Designed for trolling motors, this canoe motor mount is hinged so that your trolling motor will flip up automatically if it hits an underwater obstruction. Clamps onto your canoe gunwales without tools. Rated to 3 HP. Without the extension (item 5054) fits up to 20-inch width. With extension, fits up to 30 inch width, so you can move motor farther forward. Unhinged version, next item (5053). If your motor has its own tip-up mechanism, that is easier to use with non-hinged motor mount. Heavy-duty construction: The crossbar is 3/8" thick by 2 1/2" wide solid marine-alloy aluminum. The clamps are heavy, ribbed castings for strength and rigidity, with 3/8" diameter threaded shanks for the hand knobs on top that you use to tighten the clamps. Click on picture to enlarge.
Motor mount for Canoe - Super Strong for up to 3 HP Similar to hinged motor mount (item 5052) but rigid and stronger with bigger block for mounting motor. Great for electrics and also gas motors up to 3 HP. Maximum motor weight is 35 lbs. Clamps slide to adjust to canoe width, up to 20 inches apart, but with extension (item 5054) can fit up to 30 inch width. Heavy-duty construction: The crossbar is 3/8" thick by 2 1/2" wide solid marine-alloy aluminum. The clamps are heavy, ribbed castings for strength and rigidity, with 3/8" diameter threaded shanks for the hand knobs on top that you use to tighten the clamps. Click on picture to enlarge. Safety note: Motoring solo from the rear seat of a canoe is dangerous, because the uneven weight distribution puts the bow up in the air, and then the thrust of the motor can put it more up in the air, to the point where you could flip or swamp. At a minimum, put some weight up front. Better yet, turn canoe around and use the bow seat as the rear seat, which will put you and the motor closer to the middle. A set of our leeboards will improve steering control and help you fight crosswinds (item 5056). Set of our canoe stabilizers also strongly recommended for capsize prevention.
extension for #5052 and #5053 canoe motor mounts Fits either item 5052 or 5053 so that you can move the motor mount foward on your canoe. Most canoe motor mounts won't accomodate the width of a canoe anywhere but very close to the stern. This extension allows either of the two preceding motor mounts to go up to 30 inchs. (Low shipping cost assumes you are buying other items. If purchased solo, we will add $5 shipping).
Snap-in Motor Mount Motor mount snaps into end of our stabilizer crossbar or front crossbar of sail kit. The telescoping arm of your stabilizer float passes right through the motor mount and engages the stabilizer crossbar normally.
Leeboards and moveable mounting for canoe Clamp this leeboard set onto your canoe near the front to help you go straight. Leeboards are like paddle blades in the water, aligned to help you go straight. Greatly improves steering control and resistance to crosswinds when motoring and allows you to move the motor location forward without loss of steering ability. Motoring from the extreme rear of a canoe can be dangerous (risk of swamping or tipping). Motoring in a crosswind can present control problems. Add leeboards, move motor farther from rear end (using an add-on seat or by turning canoe around and using bow seat as the stern seat) and these problems are reduced. Stabilizers also recommended for motoring. Leeboards help with paddling and rowing too, but effect is not as dramatic. Unit includes: Telescoping crossbar with threaded ends to accept leeboard bolts, 2 leeboard and mounting bolts with hand knobs, pair of gunwale clamps. No-tool, no drill mounting system; adjustable to fit all canoes.
Electric Motor Package A 30-lb thrust electric trolling motor and a convenient rechargeable power pack with built-in charger and power meter and carry handle. We put this together with convenience in mind: Ordinarily, you buy a motor, then you have to go shopping for a battery and then a charger and when you're done you've got a system that's not so convenient to carry, store, charge and live with in your boat. With this package, the battery is thin and tall and can easily be strapped to a canoe thwart or inflatable grab line (strap included), is not so heavy (20 lbs), has built in charger for AC or charge while you drive from car cigarette lighter, has built-in power meter, and is in a sealed case - no worry ever about spilling battery acid! Yet it has enough power to take you 2 miles on one charge (20 amp-hour). Want 4-mile range? Buy second power pack. Power pack is a truck jump starter and will also start your car in an emergency using its included cables. Has accessory output (cigarette lighter style socket). Motor is light (22 lbs), quiet, smooth, powerful; has 5 forward and 3 reverse speeds, extending tiller, and plenty of power for canoe or inflatable. No smell, no noise, no gasoline fumes or hazards in your boat or car. Use of motor in salt water will void warranty, but if you rinse salt off thoroughly after each use you can get away with it. Click arrow twice to play video !! Motor mount for your canoe or inflatable sold separately (not included).
Additional battery units for motor package 20-amp-hour power pack in sealed unit with built in AC and DC charging functions, power meter and carry handle. Includes cables to jump start a vehicle and accessory outlet for anything with a cigarette-lighter type plug (e.g., air pump, gps, radio, vacuum, light). One unit powers canoe or inflatable about 2 miles on one charge (your mileage may vary).
Folding Canoe and Kayak Cart, 12-in. wheels Trundle your canoe, kayak other small boat conveniently to or from the water's edge with this amazingly well-designed and well-made folding cart. Ruggedly built trolley is lightweight and compact. Snaps apart and wheels fold up like airplane landing gear. 12-inch pneumatic tires. Straps to secure boat to cart are included. See item 5062 for same thing but with fatter, bigger wheels which roll easier on sand and soft ground. More Details and Pictures of Canoe Cart Click Here
Width extender see item 5101.
55 SF Dacron Sail and spar extension Custom made 55 SF Dacron Sail. You choose the color(s). Sail color page . Allow 3 to 6 weeks for delivery. Includes spar extension to fit our sail kit spars. Heavy duty mast recommended and is not included. See 5060 to buy this and mast upgrade as a substitution (upgrade).
kayak Kart, Dinghy Dolly, Boat Buggy, Canoe Cart with 16 Same as item 5059 but with 16"-diameter balloon tires (like wheel on a contractor's wheelbarrow) which are better for soft ground or sand. The 12" wheels on item 5059 will also work on sand with a lightweight boat, but the fatter, bigger 16" tires will roll easier.
12" slip-on canoe wheels for stabilizer or sail kit Like item 5006 but with 12" thin tire instead of 16" balloon tires. Attaches to our stabilizer or sail kit so you can roll your canoe or kayak to or from the water
Canoe Lashing Bars Join two canoes together (they may be different) to create a super stable platform to fish, motor or sail on big waters. System consists of 8 clamps for two sets of telescoping tubes. The maximum width is 10 feet
Aluminum Hitch Rack - Telescoping T support holds rear end of Canoe Support back of canoe or other boat on your trailer hitch receiver. All aluminum with stainless steel hardware, this handy rack telescopes
vertically up to the largest pickup cab roof height. Approximately 68”. Or telescopes down to car-roof height, with plenty of stops in-between for smaller pickups. MORE INFO CLICK HERE
36” long horizontal bar is padded and
comes with extension bars that
will extend out approximately
20”. Use our hitch ball offset when
towing a trailer (item 5065).
Yoke Seat for Canoe - After ordering email Jim@sailboatsToGo.com stating red, blue or brown Two products in one -- it's an add-on seat for your canoe with a comfortable padded cloth sling-type bottom. Turn it over and it's a portaging yoke, to help you carry your canoe on your shoulders, high enough so your head won't bump the floor of the upside-down canoe above it! Click Here for More Info ... After ordering, send email to Jim@sailboatsToGo.com stating fabric color choice (bright red, navy blue, dark brown).
High Seat SR - Seating Surface For Crossbar Turns our double-tube crossbar (item 5034) into a seat. Add this seating surface to our canoe stabilizer and now you've got a combination stabilizer and seat. It's a wide, flat, bench seat (7 1/2" x 40"), so it could also be used as a table or workbench afloat. Plug our rowing outriggers (item 5030) into the crossbar underneath and it serves as a great rowing seat -- nice to have the crossbar under you instead of in front of you! This seat cannot be used by itself. It requires the double-tube crossbar under it. Crossbar comes with our stabilizers, or many of our rowing packages. Or can be purchase separately.
Small rowing mirror - DISCONTINUED Small round convex mirror on flexible gooseneck that attaches to our rowing outriggers. Get one or get a pair, one for each side. OUT OF STOCK.
Large rowing mirror See where you are going while rowing!Lay the crossbar across your gunwales and clamp with gunwale clamps (included). Twin mirror version available (item 5071)
Oarlock lift blocks Accessory for our rowing outriggers that allows you to raise the oarlocks. Higher oarlocks give your hands more clearance on the return stroke. Includes stainless-steel mounting bolts. Sold in pairs.
Substitute High Seat into Basic Rowing Package You're buying basic rowing package (item 5035) and this item changes seat from drop-in seat to high seat.
Substitute High Seat SR into rowing package A You are buying package A (item 5035) today and this item switches seat from drop-in seat to High Seat SR.
Sliding seat substituted into rowing package A You are buying package A (item 5035) today and this item switches seat from drop-in seat to sliding seat.
Sockets for rowing outrigger - DIY alternative Poor man's rowing set-up: Pair of double-tube sockets you can bolt to a board. Lay board across gunwales. Rowing outriggers snap into sockets and clamp to gunwales. You sit on the board. Pay $29 for this pair of sockets, instead of $100 or more for crossbar, clamps and seat . The gunwale clamps of the rowing outriggers plus your weight on the board work pretty well to secure it, but if you add floats, you'll want to at least strap the board down. Pair of double tube sockets (7" x 2.75"). Bolts, board, straps, rowing outriggers, etc. not included.
Roof rack carrier bar with suction cup or clamping feet and extending loading bar Carrier bar with loading bars for carrying canoes, kayaks, boats, ladders on the roof of car or truck. Extremely high quality - very strong, rust proof aluminum and stainless steel with padded tops, straps, slide-out extensions ("loading bars")for easy loading and wide loads. VIDEO CLICK HERE. Carry 2 canoes! Secures to vehicle with straps and suction cups or clamping feet (clamping feet require vehicle to have rain gutter). Unextended length of 53" or 65" . Email Jim@sailboatsToGo.com after ordering and specify foot type and length. One-person loading: Slide out the extension bar beyond the side of the vehicle, lift one end of the boat up onto the bar, then move to other end of boat still resting on ground and lift it up and onto the other bar, then slide boat over to center on roof. Retract extension bars, strap on and go! Straps included. This is one bar, so change quantity to "2" and click "update quantity" in shopping cart if you need a pair. For pickups, get one bar like this for cab and one hitch rack (item 5065) to support rear of boat. Size: 65" wide (closed) is standard but if you prefer 53" size, email Jim@sailboatsToGo.com after ordering. Telescoping loading bars add up to 20" width on each side (total 40" extension). MORE INFO CLICK HERE See item 5107 for option to get one longer loading bar coming out just one side instead of standard 2 shorter ones. Great for loading wide objects single-handedly.
Steel Hitch Rack Not as fancy as our aluminum hitch rack (item 5065) but plenty strong and versatile. This heavy duty steel rack requires a 2" receiver type hitch. Extend
your pickup box back 4’ for long loads or convert to a “Tee
Like” hitch rack. The top is 47" wide, making it two canoe compatible,
combined with a wide cab rack. Vary the height from 55" to 60".
Weight: 39bs. Painted black steel. Click Here More Info
Pick-up Truck Box Rack Aluminum and stainless truck rack mounts to the sides of the bed by clamps or bolts (you specify which type). More Info On Rack Page Click Here
2 Suction Cup Feet + hardware to make 1 wood carrier bar roof rack Economical roof rack -- Get 2x4's locally and use this kit of parts to make a carrier bar. Makes one bar -- order 2 kits to make a pair of bars.
More Info on Rack Page Click Here
Rowing Accessory Bundle - mirror & lift blocks 8" mirror on its own 42" crossbar to put at the stern, and lift blocks to allow you to raise oarlock height on the outriggers.
Economy Rowing Package Canoe rowing for less money: Package consists of oars, clamp-on oarpins, rowing outriggers, and a pair of outrigger sockets. Buy yourself a board locally (1 x 10 x width of your canoe plus a little bit more) and bolt the sockets to the board. Place board with sockets across gunwales, plug outriggers into sockets and clamp to gunwales with included clamps, sit on board, put oars in place and row! It's actually a very satisfactory canoe rowing solution and very quick to put on and take off your canoe. Picture: Click Here Socket is a double-tube socket, so you can also add stabilizer floats (item 1002 or 1006) but then plan to secure board to canoe for times when you are not sitting on it -- get a pair of our gunwale clamps or devise other means.
Optional lift blocks (item 5073) will increase clearance between knuckles and knees on the return stroke.
clamp-on oarlock (clamp-on oarpin) Clamp-on oarlock for 1 1/4" oar shaft (all of our oars are 1 1/4"). Has 1/2"-diameter pin to go in oarlock socket. Clamps and unclamps with wingnut. Plated steel.
Ethafoam canoe sponsons - foam flotation - 1 pair Some canoes will sink if swamped. Sponsons add flotation to help keep swamped canoe afloat. Might save your canoe, might even save the life of a person clinging to overturned canoe. Each sponson is a 4" diameter half-round, that is 9 feet long. Together, the pair of sponsons provide about 45 lbs of flotation (meaning they displace 45 lbs of water) which might make the crucial difference between sinking and floating. Add a pair of our stabilizer floats, and there's another 50 lbs (approx) of flotation. Sponsons also add a little stability, act as a splash rail to deflect spray when motoring or sailing, and a rub rail (bumper) when alongside a dock or another canoe (might save mashed finger!). Bolt on (bolts provided) or glue on. black. More Info
Basic rowing package for inflatable kayaks Rowing beats paddling for speed & efficient use of your energy. This package is everything you need to put oarlocks on your inflatable kayak (except you supply a 1 x 10 board for a seat and buy oars and oarpins separately). Package consists of rowing outriggers, oarlock sockets and lift blocks, straps and instructions. Oars and oarpins not included (you already have at least 1 if you have our sail kit). More info: CLICK HERE
Sliding seat and rowing outriggers for rowing inflatable kayaks Get your legs into the action to really make your inflatable kayak fly under oar power. Package consists of sliding seat bolted to baseboard, outriggers to provide oarpin sockets out away from your body, 2 ethafoam planks to go under the seat and straps. Buy oars & oarpins separately or use your steering oars if you already have them from our sail kit.
For kayaks - leg and deck bracket for mounting stabilizer or sail kit This is one leg and one bracket, but minimum order is 2. A set of 5 of these, plus the item 2021 sail kit, plus stabilizer floats (e.g. 5028)makes a sail kit for non-inflatable kayak that is an alternative to our 6004 sail kit, with the advantage that it is open on the sides (no full-length bars connecting front and rear crossbars) and is mechanically mounted (no straps). Yet, it comes right off by pulling the pins that connect the deck brackets to the legs.
Leeboard upgrade - convert your purchase to unbreakable blade Add this item to your cart to delete standard leeboards from a product you are purchasing now and substitute leeboards with unbreakable, larger blades. Polycarbonate plastic used in these blades will not shatter, crack or break. Also, blade is designed to put more blade area into the water (and therefore fight side slip better) on downwind side as boat heels (tilts). Details: Click Here
Unbreakable leeboards (pair) Pair of leeboards with unbreakable polycarbonate blade. . White blade. Details Click Here No mounting hardware included.
If you want to upgrade the leeboards included with a product you are buying today, use item 5092, not this item number.
Standard leeboard and bolt (replacement parts) 1 standard leeboard and mounting bolt. This is a replacement part and does not include any crossbar or other means to mount to your boat.
4 Rubber expansion nuts (well nuts) - Makes installation easy on sit-op-tops Rubber insert with brass female thread allows bolt-on installation even when you can't get to the back side to hold a nut. Rubber nut works kind of like a "molly" or "screw plug" hollow wall anchor you might use in your house to hang a picture or a shelf bracket. Auto makers use them to mount luggage racks, so you know they are strong! Just drill hole, insert rubber nut (rubber collar keeps it from falling through and seals hole), and screw in your bolt. As you tighten, rubber shaft on inside scrunches up so rubber nut resists pulling out and holds your accessory firmly. Set of 4. Note: Item 6004 sail kit straps on -- no bolts, no drilling, no rubber nuts.
Kayak Adapter - Pair of legs & deck brackets for attaching crossbar to kayak Bolt deck brackets (small, low-profile, with rounded corners) to front or rear deck. Then legs that crossbar sits on mount to deck brackets by means of easy-on, easy-off pin. Alternative to strap mounting of item 6004 sail kit (2 pair required). Also good for mounting canoe stabilizer on your kayak. CLICK HERE FOR PICTURES Extra deck brackets available - item 5104 - so you can swap one stabilizer between 2 kayaks or between front and back deck of same kayak.
Crossbar (for stabilizers, rowing units, main front crossbar for sail kits) Double-tube crossbar (forms the mid section of stabilizers, or main front crossbar of sail kits). Also known as a Universal Receiver.
Bolt-on gunwale J brackets accept gunwale clamp aka false gutters If your canoe or fishing boat has no gunwale lip or only a rounded gunwale lip with no good surface underneath for our gunwale clamps to get a good hold on, you need these brackets. You drill and bolt on, or rivet on, these brackets at each location where a gunwale clamp will be and the clamp grabs the bracket just like it was a gunwale lip. We supply bolts or rivets (email us which to send -- use rivets if you can't get to back side - requires a pop riveting tool, which is not an expensive tool to buy if you don't have one). Called "false gutters" because they also work for clamp-on roof racks for vehicles without rain gutters. Need 3 pair for a canoe kit. Sold by the pair. Profile is like an upside-down J
55 SF Dacron Sail Custom made in your choice of up to 5 different colors. Very high quality, long-lasting dacron sail for the Sunflower. Sail color page . Allow 3 to 6 weeks for it to be made.
Kayak saddle set for carrier bars Cradles your kayak right-side up atop our carrier bars (or most other bars with square or rectangular cross-section). Set includes two lefts and two rights to adapt 2 bars to carry one kayak. Saddle pieces clamp to carrier bars with hand bolts (included). Straps to hold Kayak down not included. Pictures on roof rack page, CLICK HERE and scroll down.
Width extender for folding boat cart - 15" or email Jim@sailboatsToGo.com for other lengths This 15" extension snaps into the middle of the folding canoe/kayak/boat cart to make a wider cart that's just as portable. Other lengths available, email Jim@sailboatsToGo.com. Made out of the same heavy duty material as the cart itself. 10-second, no-tool installation or removal.
Sails for Snark Wildflower Snark Wildflower sails (main and jib). Custom made in USA using 3.8-oz. Dacron (better than original equipment). Professionally hand finished. Sail bag for main included. Allow 3 - 6 weeks. Price shown is for Natural. Wide choice of colors available for $140 additional. Can order main or jib separately (email for color orders or individual sail orders): jim@sailboatstogo.com )
Bag for stabilizers - Free shipping* Nylon bag with zipper and shopping-bag style carrying handles. Sturdy bag, just the right size for the canoe or kayak stabilizer. Accepts either hydrodynamic stabilizers or ethafoam stabilizers and associated hardware.
Free shipping if purchased in the same order as a stabilizer. Otherwise, $7 will be added after checkout for shipping. Also works for sail kits -- get 2 if sail kit has stabilizer floats. Also free shipping in that case. Item 5118 is hydrodynamic stabilizer and carry bag in one item. *Bag ships free in continental US when purchased with a sail kit or stabilizer.
Customer comment: "Jim, the bag just arrived. It is beautiful and probably about 50% under-priced for what it is. Beautifully made; reinforcements in all the right places; heavy duty zipper; beautiful sewing job on the red piping; just a terrific package... Be well and take care and thank you once again for producing such a teriffic product."
--customer Alan S. March 2010
Deck brackets For use with item 5096 (kayak adapters) -- this is an extra pair of deck brackets, with bolts, so that you can easily swap one stabilizer between 2 kayaks or between front and back deck of one kayak. This item is just the deck brackets.
Giant Inflatable Canoe Stabilizers These inflatable pontoons attach to your canoe to make it very, very, very stable. Can also be used without the canoe: They come with additional parts to join them into a nifty catamaran kayak, great for paddling, rowing (with our rowing equipment) or sailing (with our special sail kit). The pontoons are a PVC air bladder inside a nylon fabric skin, and are stiffened with a full-length rigid tube that comes apart in 3 sections. Pontoons are 10 feet long, deflate to compact size. Lightweight. Picture:
Click Here
Modify loading bar to one long one Adding this item to your shopping cart tells us you want your carrier bar to have one long loading bar coming out just one side instead of 2 shorter ones. Great for one-person loading of wider boats, or sheets of plywood!
This item number only works as a means to modify order of a carrier bar with loading bars. Can't be ordered on its own! Allow extra time for doing the modification. We don't stock them this way.
Storage racks for canoe - attach to wall, folds flat For storing canoe, kayak, or other long object. L brackets with 36"-long horizontal part of the "L" to hold up the boat or other stored object. Vertical segment that attached to wall is 12". The horizontal part folds up out of the way when not in use. Capacity: 110 lbs. Can hold wider canoe -- remember, you canoe is narrower at the ends! More Info Click Here then scroll down until you find Garage Storage Racks
Bailing bucket cloth bucket folds to fit in a pocket and unfolds to hold up to 3 gallons. A bailing bucket could save your life if your canoe capsizes or gets swamped.
Protective cover for canoe - email jim@sailboatstogo.com to specify length of canoe The sun's rays deteriorate just about any canoe material other than aluminum. This "Tyvek Supra" cover blocks them, but allows canoe to breathe out moisture -- this is a DuPont material now being used for car covers and in building roofs between plywood and the roofing material. Also protects canoe from sap, bird droppings, dirt, etc. Has draw string. Email jim@sailboatsToGo after ordering to specify canoe length
Floor seat for canoe Get your center of gravity VERY low and be VERY comfortable and stable with this seat. Foam seat with backrest. Backrest intended to rest against a canoe thwart for support. Use it in camp too -- rest it against a tree. Waterproof compartment in seat for small valuables - e.g. keys, matches, watch.
Storage Rack Stops - pair Use with item 5108 canoe/kayak storage rack. L-bracket clamps onto horizontal arm of storage rack to prevent to prevent boat from sliding. Useful for storing kayaks on edge.
Pulley Lift Ceiling Storage System Raises boat to ceiling for storage.
Double Hook stores bicycles, canoes, deck furniture, ladders, kayaks and more. Raises and lowers loads in seconds. Extra storage in unused areas. Easy one person operation. Versatile to install on open rafters or finished ceiling. Use it to get your ladder up and out of the way.
Lifting capacity of 80 lbs. and safety release mechanism that keeps it from accidentally releasing. Straps not included. Approximately 40' of rope and will work on up to 9' ceilings.
Comfy Back Rest for Canoe Seat "One of the most comfortable seat pad and backrests we have used," says one paddling friend.
It has internal fiberglass battens that set it apart from the rest.
The back is 15" high with a soft 1" closed cell foam padding and a durable cover.
Easy to use rust free buckles hold securely to any canoe seat.
Comes Black or Green in Color. Email Jim@sailboatsToGo.com to specify color or else we'll flip a coin. Or call 978 263 7598
Hydrodynamic canoe stabilizer w/bag - email Jim@sailboatstogo.com to specify crossbar length Our best canoe stabilizer. Clamps onto your canoe and prevents capsizing. Great for any canoeist. Essential for motoring.
MORE INFO AND PICTURES CLICK HERE
Mast step and foot for canoe sail kit Socket (mast step) for 1 1/4" mast and the foot that baces it down to the canoe floor. Requires crossbar and gunwale clamps (not included) or our canoe stabilizers for attachment to canoe.
Front assembly for canoe sail kit Canoe mast step (item 5119) plus crossbar and gunwale clamps. Will be a 40" crossbar unless you email or call and specify a different length.
Canoe sail kit front assembly with large sail Canoe sail kit front assembly including mast step and foot, crossbar and gunwale clamps, heavy-duty mast, spars with extension for large sail, large 55 SF nylon sail. Buy this, then put leeboards and either a rudder or steering oar set-up on you canoe and you have a complete canoe sail kit.
Minn Kota Endura 30 Best motor for a canoe. 30 lb thrust. Smooth, light, quiet and reliable. 3 forward speeds and 3 reverse. Plenty of power.
Manufacturer says fresh water only, but you can get a way with use in salt water if you rinse it well after each use. It will shorten the life and void the warranty, but there is no salt water motor in this price and weight class.
Single-tube crossbar Like our double tube crossbar but with only one tube inside for receiving attachments, such as stabilizer, leeboard mounts, rowing outriggers. Order gunwale clamps separately. Email us at Jim@sailboatstogo.com and specify desired length.
Cane Seat for Canoe - Be Comfortable, Lower CG Put this seat on the floor of your canoe. The person sitting there will ride in luxury, with full back support, and will be making the canoe much more stable at the same time, by lowering your center of gravity. He or she will feel more secure and more comfortable than you ever thought possible in a canoe. Use it outside the canoe too, at the campsite, picnic, parade or ballgame. Great gift. Width = 14 inches. The back part is 18� high. The seat part is 4 1/4� high at the front, 2 1/2� at the rear. Quality ash frame with cane seat and cane back. Clear polyurethane finish. Folds for easy carrying. Wt. 7 lbs. Made in USA by Essex Industries, a nonprofit organization that employs and trains adults with disabilities to do the manufacturing.
Mighty Might Kayak/Canoe Cart The Seattle Sport MightyMite Cart is strong enough to take a 200 pound, loaded canoe, yet small enough to take on board any canoe and most kayaks. With pneumatic wheels, galvanized bearings, anodized aluminum frame, a loop cinch strap tie-down, and a single leg kickstand, this cart offers great features at a great price.
Collapsed: 21.5" length 10.5" height 4" width Weight of cart – 6.6 lbs.
Weight capacity – 200 lbs.
Bilge Pump This bilge pump will get the water out of your boat fast. It can pump 8 gallons a minute. Super strong pump shaft and impact resistant plastic body.
Trailer for canoes, kayaks or small boats, by Trailex 15' aluminum-frame trailer takes boats up to 17' and weight up to 200 lbs. Trailer weighs a mere 125 lbs., so it also works as a dolley you move manually without vehicle. Easy assembly with very explicit directions and only simple tools required. We pay the shipping cost -- arives by UPS. Includes all necessary lighting and wiring. See below for individual accessories or deluxe package. Also, adaptor for hauling 2 kayaks. More details and pictures click here
Deluxe trailer for canoes. kayaks and small boats Same as item 5128, but with the addition of the most popular and useful accessories: "bearing buddies w/bra" to protect your wheel bearings against water damage; hand winch; winch post; spare tire; spare tire carrier. Free shipping! More details and pictures click here
Parking Jack for trailer Fits the 5128 or 5129 trailer and holds up the front when trailer is not connected to vehicle. Has a wheel at the bottom. Free shipping if bought with trailer. If bought by itself we will add $15 shipping manually (won't show in your online shopping cart).
Bearing Buddies w/Bra - Protect trailer wheel bearings Pair of gizmos that protect your wheel bearings from water damage. Compatible with 5128 and 5129 trailer. Free shipping if bought with trailer. Otherwise, we will add $10 shipping manually.
Spare Tire carrier for trailer Attaches to 5128 trailer and accepts spare tire (sold separately). Free shipping applies only when bought with trailer. Otherwise, we will add $15 shipping manually.
Spare tire for 5128 trailer 480 x 8" tire on galvanized wheel for 5128 trailer. Free shipping with purchase of 5128 or 5129 trailer. Otherwise, we will add $15 shipping manually.
Hand winch and winch post for 5128 trailer Hand winch and winch post for the the item 5128 trailer. Free shipping applies only if you purchase trailer at same time from us. Otherwise, we will add $25 shipping manually.
2-kayak adapter for trailer Adapts the 5128 or 5129 trailer for carrying 2 kayaks. Free shipping applies only at time of purchase of trailer. If bought without trailer, we will add $25 shipping manually.
Rowing package with no seat - email jim@sailboatstogo.com after ordering and state oar length and crossbar length wanted Oars, oarpins, rowing outriggers, crossbar, and gunwale clamps. Please specify crossbar length (36", 40", 45" or custom at $10 more) and oar length (7 foot or 7 1/2 foot) in a follow-up email to Jim@sailboatsToGo.com.
Sail 45 SF light blue/dark blue w/our logo. By Priority Mail. 45 SF sail in alternating colors of light blue and dark blue. Fits Sea Snark, Super Snark, Sea Eagel, SOAR, Spring Creek and our rigs. Please give postal address. Nylon.
55 SF Sail in Light Blue/Dark Blue with Our Logo. By Priority Mail. 55 SF nylon sail with SailboatsToGo logo. Fits Sunflower Sailboats as is or our rigs with spar extension.
55 SF Nylon Sail in Yellow/White/Blue, fits Sunflower 55 SF nylon sail in yellow/white/blue color combination. Fits Sunflower sailboats and, with addition of a spar extension, fits our rigs. Says "Sunflower" on foot of sail near rear.
Mast step The mast step is the metal socket that receives the bottom of the mast and holds it vertical. This can be directly bolted to a solid, strong surface or it can clamp around a crossbar, such as our front crossbar for the inflatable boat sail kit. For the canoe sail kit, order the canoe mast step and foot instead, so you get the additional parts needed to brace to the bottom of the canoe.
White Dacron Sail - 45 SF size - Fits Snarks and Our Rigs. Dacron is the sail material used in sails for most larger boats, because it is more durable and holds its shape better than nylon. A nylon sail stretches more in high wind, which can reduce your upwind performance. For years, we've sold Dacron sails that are custom made as an upgrade, as an upgrade taking 6 weeks and costing more than this sail. Now this sail brings down the price and eliminates the long wait. Fits Super Snark, Sea Snark, Sea Eagle Paddleski, Spring Creek and out rigs set up for 45 SF sail.
White Dacron Sail - 55 SF fits Sunflower and our rigs Dacron is the sail material used in sails for most larger boats, because it is more durable and holds its shape better than nylon. A nylon sail stretches more in high wind, which can reduce your upwind performance. For years, we've sold Dacron sails that are custom made as an upgrade, as an upgrade taking 6 weeks and costing more than this sail. Now this sail brings down the price and eliminates the long wait. Fits Sunflower and is the same size and shape as our other 55 SF sails.
Upgrade to 55 SF white Dacron sail and heavy duty mast This is just like item 5011 except the sail will be a white Dacron sail instead of a nylon sail. This is a substitution item which is valid to buy only in order to upgrade a sail kit you are buying in the same order. This item deletes the 45 SF nylon sail and standard mast from your order and substitutes in a 55 SF white Dacron sail, taller and stronger mast, and adds an extension for your top spar.
Upgrade a Sail in Your Order to White Dacron Add this item to your cart to convert the sail in something you are ordering now from nylon to white Dacron. Dacron is a higher-quality sail material that is longer lasting and holds its shape better for better upwind performance in strong winds. Adding this item to your order deletes the 45 or 55 square foot nylon sail in another item you are buying at this time and replaces it with a white Dacron sail of same size.
Kayak Stabilizers - Stabilizer Float System for Small Cockpit Kayaks Outrigger floats, crossbar and special low-profile brackets for attaching the crossbar to the deck of your kayak. This is for small cockpit kayaks (cockpit under 65" long). Large cockpit kayaks can use canoe stabilizers (clamps on gunwales instead of bolting on).
Bag for sail rigs - big Big enough for the canoe or kayak rig including the stabilizer floats, with a handy pouch compartment for small parts. Also good for the inflatable boat rig. Heavily padded shoulder strap and suitcase-type handle. Strong fabric and strong zipper. Get it for the inflatable boat sail rig even if you don't get stabilizers, so you'll have extra room for a towel and a life jacket and a few other odds and ends. Although it's technically too big for the airline free baggage allowance, Jim (SailboatsToGo owner) has flown with it many times and never gotten hit with an over-sized bag fee. They weigh stuff, but rarely measure dimensions. If you want a bag that fits within airline dimension restrictions and can hold the sail rig excluding stabilizer floats, see item 3012 (item 3012 bag requires upgraded leeboards; item 6005 bag does not). For a similar size bag that has wheels, see item 6021.
Braces for foam floats If you sail or motor with foam floats pressed hard on the water and moving fast in the water, the foam floats may eventually develop some play between the float and the vertical tube it is mounted on. A pair of these braces will help keep the foam floats pointed straight ahead, preventing that play from developing, or correcting it if it has already developed. Not needed with hydrodynamic floats nor with foam floats in moderate use. Braces may only be used with floats in up position but floats are easily released from braces to go into down position.
Sail kit bag with wheels - Big & heavy duty Big and heavy duty bag with wheels that make it ideal for airline travel. Full-length heavy-duty zipper. Outside pocket for small parts. Inside straps to secure the contents. Other bag options: See items 6005 and 3012.
Rudder Rudder with kick-up blade, aluminum body, tiller and rudder pin. Blade is made from extremely rugged polycarbonate -- the stuff high quality helmets are sometimes made of. Requires two eyebolts (included) be mounted to boat's transom to accept rudder pin, or you can use our clamp-on rudder mount (item 5029).
Snark and Sunflower Stabilizer Pontoons Greatly reduce risk of capsizing and increase feeling of security. Hydrodynamic streamlined stabilizer floats and anodized aluminum hardware. Attaches in 2 minutes using 2 straps (included). No drilling or other modification to your boat. Foam blocks (included) cushion point of contact between metal crossbar and your boat. Strap wraps under the boat, putting no more stress on it than a strap holding a boat to a roof rack.
Rowing rig for Snark or Sunflower Includes: Oars, oarlocks, aluminum arms to receive oarlocks bolted to a plywood base that you sit on, and a thick ethafoam cushion that goes between the plywood and your boat to protect the boat and raise the rig up to proper height so the aluminum arms clear the gunwales. For Super Snark, Sea Snark or Sunflower.
Stabilizer for Snarks and Sunflowers Our hydrodynamic stabilizer system, specially adapted for Snarks and Sunflowers with a cushioned strap-on attachment system. Stay right-side up when you are sailing! Add these outrigger pontoons to your Sea Snark, Super Snark, or Sunflower sailboat.
Custom Payment - Change quantity then click "Update Quantity" button. Then Checkout. Use this item to pay for extra shipping or anything else we have custom-quoted to you. It has a price of $1 so hit "Buy Now", then set the quantity to equal the number of dollars you wish to pay and then hit the "Update Quantity" button in the lower left corner of the shopping cart screen. Example: To pay 25 dollars, order quantity of 25.
Canoe stabilizer, with 36-in. mid section, Ethafoam floats The crossbar that clamps to your canoe and accepts the telescoping float arms is 36" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment to foreign countries, Canada, Hawaii and Alaska, please also add appropriate shipping item to your purchase (see items 8915, 8916, 8917).
Canoe stabilizer, with 40-in. mid section, Ethafoam floats The crossbar that clamps to your canoe and accept the telescoping float arms is 40" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment to foreign countries, Canada, Hawaii and Alaska, please also add appropriate shipping item to your purchase (see items 8915, 8916, 8917).
Canoe Stabilizer, with 45-in. mid section, Ethafoam floats The crossbar that clamps to your canoe and accepts the telescoping float arms is 45" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment to foreign countries, Canada, Hawaii and Alaska, please also add appropriate shipping item to your purchase (see items 8915, 8916, 8917). Shipment to foreign countries, Canada, Hawaii and Alaska, please also add appropriate shipping item to your purchase (see items 8915, 8916, 8917).
Canoe stabilizer, with 30-in. mid section, Ethafoam floats The crossbar that clamps to your canoe to accept telescoping float arms is 30" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment to foreign countries, Canada, Hawaii and Alaska, please also add appropriate shipping item to your purchase (see items 8915, 8916, 8917).
Canoe stabilizer, custom-length mid section, Ethafoam floats The length of the part that clamps to your canoe is any reasonable request. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths.
Canoe stabilizer, with 30-in. mid section, Hydrodynamic floats The crossbar that clamps to your canoe and accepts the telescoping float arms is 30" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below)
Canoe stabilizer, with 36-in. mid section, Hydrodynamic floats The crossbar that clamps to your canoe to accept the telescoping float arms is 36" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below)
Canoe stabilizer, 40-in. mid section, Hydrodynamic floats The crossbar that clamps to your canoe and accepts telescoping float arms is 40" long. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below)
Canoe stabilizer, 45-in. mid section, Hydrodynamic floats The crossbar that clamps to your canoe and accepts telescoping float arms is 45" long. Needs to be long enough to span your canoe at point of installation. Ideal for Coleman, Pelican and other outside-lip canoes, because mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below)
Canoe stabilizer, custom length mid section, Hydrodynamic floats The length of the crossbar that clamps to your canoe and accepts telescoping float arms is any reasonable length. Email Jim@sailboatstogo.com to specify. Needs to be long enough to span your canoe at point of installation. For Coleman, Pelican and other outside-lip canoes, mid section needs 4" length in excess of canoe width. Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below)
Kayak stabilizer with 30-in mid section and Ethafoam floats The crossbar that accepts telescoping float arms is 30" long. Needs to be long enough to span Kayak, but longer is fine. Most people get 30". But if you want to also be able to use on canoe, get long enough to span canoe (plus 4" more, in case of Coleman, Pelican and other outside-lip canoes). Canoes also need a pair of gunwale clamps (item 5041 on parts page). Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below).
Kayak stabilizer with 36 The crossbar that accepts telescoping float arms is 30" long. Needs to be long enough to span Kayak, but longer is fine. Most people get 36". But if you want to also be able to use on canoe, get long enough to span canoe (plus 4" more, in case of Coleman, Pelican and other outside-lip canoes). Canoes also need a pair of gunwale clamps (item 5041 on parts page). Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths.
Kayak stabilizer with 40-in. mid section, Ethafoam floats The crossbar that accepts telescoping float arms is 40" long. Needs to be long enough to span Kayak, but longer is fine. Most people get 30". But if you want to also be able to use on canoe, get long enough to span canoe (plus 4" more, in case of Coleman, Pelican and other outside-lip canoes). Canoes also need a pair of gunwale clamps (item 5041 on parts page). Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below).
Kayak stabilizer with 45-in. mid section, Ethafoam floats The crossbar that accepts telescoping float arms is 45" long. Needs to be long enough to span Kayak, but longer is fine. Most people get 30". But if you want to also be able to use on canoe, get long enough to span canoe (plus 4" more, in case of Coleman, Pelican and other outside-lip canoes). Canoes also need a pair of gunwale clamps (item 5041 on parts page). Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths. Shipment outside continental US please add appropriate extra shipping item also (item 8915, 8916 or 8917 below).
Kayak stabilizer, custom length mid section, Ethafoam floats The length of the crossbar that accepts telescoping float arms is any reasonable length (specify in an email to Jim@sailboatstogo.com. Needs to be long enough to span Kayak, but longer is fine. Most people get 30". But if you want to also be able to use on canoe, get long enough to span canoe (plus 4" more, in case of Coleman, Pelican and other outside-lip canoes). Canoes also need a pair of gunwale clamps (item 5041 on parts page). Available sizes are 30", 36", 40", 45" and, for $10 more, custom lengths.
Shipment of Hydrodynamic stabilizer to Europe, Japan, Australia, etc. Extra shipping cost to other countries, except Canada, added to basic cost. Foreign taxes, if any, are responsibility of recipient.
Shipping Ethafoam stabilizer to Europe, Japan, Australia Etc. Shipping cost to other countries, except Canada, for Ethafoam type stabilizer. Shipping the 45" size to Australia, Eastern Europe and most less-developed countries involves additional cost. Email Jim@sailboatstogo.com for details if ordering the 45-inch size from those countries. Foreign taxes, if any, are responsibility of recipient.
Kayak stabilizer additional shipping to UK, Australia, Europe, Japan Add this item to your shopping cart to pay the additional shipping cost on a kayak stabilizer to UK, Europe, Japan, Australia, New Zealand. Foreign taxes, if any, are responsibility of recipient.
Reuben Chinnery CD 16 Songs, Acoustic 12-String Music guaranteed to make you start daydreaming of perfect days and nights in the Caribbean. Jost Van Dyke guitarist and singer Reuben Chinnery is masterful. Double click arrow to play video with Reuben's music. ' Style is folk acoustic with mellow Reggae beat or Calypso flavor. More Info on Reuben Chinnery CD
Stearns Life Vest (Adult Life Jacket or PFD) Stearns Adult Life Vest. Law and common sense require an approved flotation device for every passenger, so you need an extra for guests. This is a comfortable, approved, Type III vest. Adjustable. Also called lifejacket or PFD - personal flotation device. See next item for 2.
*Terms: We will provide telephone technical support and accept returns for refund
less round trip shipping within 30 days of delivery. Returns must be complete, unmodified,
in like-new condition, with original packaging.
All parts are Warranteed for 1 year from date of purchase.
** Shipping prices quoted are for within the continental United States only. Please
email Sales@SailBoatsToGo.com to receive
a quote for shipping to your international location. Please include your shipping address, and
the product(s) your are interested in purchasing.
Boat Cart: Lightweight folding hand trailer - 
)
_of_Sail_w_J_andGG_10-03_050.jpg', 'single'))
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
.jpg', 'single'))
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
