Island Hopper Gas Outboard Motors for Small Boats

(Looking for Electric Motors? Click Here.)

This is a long page featuring many different models so please keep scrolling down.

General Info Applicable to All Models Below:

Air Cooled - No Internal Water Channels to Clog or Corrode
Compact and Affordable ($475 to $620)
Weigh Just 18lbs to 20lbs
Pack a Powerful 1.5 to 2.5 HP (comparable to 60 - 90-lb. Thrust Electric).

2-Cycle or 4-Cycle.  Call us at  1-978-263-7598.  Email Jim@SailboatsToGo.com

Equipped with forward and neutral.  Motor turns 360 degrees in the transom mount, so you can go backwards.   They are self-contained -- no battery, no wires, no gas lines.  Propel 2 to 3 people or 400lbs at 3-4mph in a canoe, dinghy, or inflatable.

One hour max. continuous run time, then let cool 3 minutes.  (It's a good opportunity to refuel anyway).

One year manufacturer warranty.  Not returnable.  

More general info at bottom of this page.  8 models to choose from.  Models and ordering buttons:

1.5HP MINI TROLLING OUTBOARD
2 Cycle (Scroll Down for 4-Cycle Models)

Engine:
Weight:
Speed:
Shaft Length:
Trolling Modes:
Engine Type:
Carburetion:
Starting System:
Coil Type:
Safety Switch:
Fuel Mix:
Fuel Tank Capacity:
Engine Make:
Drive System:
Clutch Type:
Cooling System:
Turn Radius:
Shaft Type:
Propeller Type:
Housing Material:
General:  
35cc's  1.5 HP (scroll down for other models)
18lbs /- *
2-4 mph (typical canoe, calm conditions)
19.5" or 24"
5 Tilting Options
2 Cycle
Primer Bulb-Pulsating
Recoil Pull Cord
CDI
Remote Kill Switch
24:1 (gas:oil**)
32oz / 1.0L
BridgeStone
Forward/Automatic Neutral
Centrifugal Dry Pads
Air Cooled
360 Degree 
Solid
Composite
Marine Grade Aluminum
Please read general info at top of page.
Picture
colors may vary
Model # 99520
1.5HP / Two Stroke
19.5" Regular Shaft
Limited Inventory


$475.00
Buy Now   Item 7100
Model # 99070
1.5HP / Two Stroke
24" Long Shaft
Limited Inventory
 

$520.00
Buy Now    Item 7102
Not for sale in the State of California
 
 This is a long page featuring several different models so please keep scrolling down.
*There may be a weight difference of 2lbs-4lbs /- on all outboards.  **Use regular oil, NOT synthetic. 
___________________________________________________________________

2.0HP - 4 Stroke Outboard

Engine
Speed
Shaft Adjustability
Trolling Modes
Engine Type
Carburetion
Steering


Starting System
Coil Type
Safety Switch
Oil Type
Engine Oil Qty
Gear Box Oil
Fuel Tank Capacity
Engine Make
Drive System


Cooling Stystem
Exhaust System
Turn Radius
Weight
Propeller Type
Housing Material
49cc"s 2.0 HP 4 Stroke
4mph
19.5" or  24"
5 Tilt  / Trim Options
Unleaded Regular Gas
Pulsating
Tiller Built with Throttle Control and Lock Idle Speed Control
Recoil
CDI
Engine Stop Switch
SAE 10w30 or SAE 10w40**
6.25oz
Marine Grease
32oz Built In Tank
Mitsubishi Components
Centrifugal Clutch Neutral Safety Idle
Air Cooled
Muffler Glass Packed
360 Degree
20lbs*
Composite
Marine Grade Aluminum
Please read general info at top and bottom of page.
Picture
colors may vary.  Camouflage model available.   Call 978 263 7598
Model # 99850
2.0HP / Four Stroke
19.5" Regular Shaft
Limited Inventory 

 

$545.00*
Buy Now  Item 7104
Model # 99310
2.0HP / Four Stroke
24" Long Shaft
Limited Inventory 
 

$590.00*
Buy Now  Item 7106
*Not for sale in the State of California
*There may be a weight difference of 2lbs-4lbs /- on all outboards.  **Use regular oil, NOT synthetic. 
_____________________________________________________________________________________________________

2 HP TROLLING OUTBOARD*
2 Cycle

Engine
Weight
Speed
Shaft Adjustability
Trolling Modes
Engine Type
Carburetion
Starting System
Coil Type
Safety Switch
Fuel Mix
Fuel Tank Capacity
Engine Make
Drive System
Clutch Type
Cooling System
Turn Radius
Shaft Type
Propeller Type
Housing Material
49cc's 2 HP
18lbs /- *
2-4 mph
Choose From 19.5" or 24"
5 Tilting Options
2 Cycle
Primer Bulb-Pulsating
System Recoil
CDI
Remote Kill Switch
24:1
32oz / 1.0L
BridgeStone
Forward/Automatic Neutral     
Centrifugal Dry Pads
Air Cooled
360 Degree
Solid
Composite
Marine Grade Aluminum 
Please read general info at top and bottom of page.
2 HP Trolling Outboard
colors may vary
This outboard will move inflatable boats, dinghies, sail boats (12'-14')

Total Weight: 500lbs.
Hull/Gear:     100lbs.
Persons:         400lbs.

This trolling outboard  is an excellent solution for compactness, weight, and practability, when considering a motor for your boat.
Model # 99630
2HP / Two Stroke
19.5" Regular Shaft
Limited Inventory 
 

$525.00*
Buy Now   Item 7108
Model # 99180
2HP / Two Stroke
24" Long Shaft
Limited Inventory 
 

$570.00*
Buy Now  Item 7110
*Not for sale in the State of California. 
*There may be a weight difference of 2lbs-4lbs /- on all outboards.  **Use regular oil, NOT synthetic

______________________________________________________________________________

Most Powerful: 2.5HP MINI TROLLING OUTBOARD
2 Cycle

Engine
Weight
Speed
Shaft Adjustability
Trolling Modes
Engine Type
Carburetion
Starting System
Coil Type
Safety Switch
Fuel Mix
Fuel Tank Capacity
Engine Make
Drive System
Clutch Type
Cooling System
Turn Radius
Shaft Type
Propeller Type
Housing Material
2.5 HP
18lbs /- *
4-5 mph / 6-7km
Choose From 19.5" or 24"
5 Tilting Options
2 Cycle
Primer Bulb-Pulsating
System Recoil
CDI
Remote Kill Switch
24:1
32oz / 1.0L
BridgeStone
Forward/Automatic Neutral
Centrifugal Dry Pads
Air Cooled
360 Degree
Solid
Composite
Marine Grade Aluminum
Please read general info at top and bottom of page.
2.5HP MINI TROLLING OUTBOARD 2 CYCLE
Colors may vary
Model # 99740
2.5HP / Two Stroke
19.5" Regular Shaft
Limited Inventory 
 

$575.00*
Buy Now   Item 7112
Model # 99620
2.5HP / Two Stroke
24" Long Shaft
Limited Inventory 
 

$620.00*
Buy Now   Item 7114
*Limited production call for availability.
 
*Not for sale in the State of California
*Colors may vary
   
*Metal weights may vary from finished product to finished product; therefore there may be a weight difference of 2lbs-4lbs /- on all outboards.
More General Info Applicable to All Models:
Meets CARB TIER II: EPA stringent exhaust emission regulations.
Anti-Vibration System:
 
Ergonomically Friendly:



 
Centrifugal Clutch:

 
Clutch Housing:

 
Propeller:

 
Drive Shaft:


 
CDI:


Muffler:



 
Air filter:





Cooling System:


 
Gas Tank:


 
Lower Gear Case:



Shaft:



Shaft Housing:



Motor Mount:



Shaft:


Assembly:
To isolate tiller handle from engine housing.

The tiller handle has a built in throttle control, kill switch, isolating bushings to alleviate wrist fatigue while under way, plus a special feature “Lock In Trolling” mode for slow cruising.

Built to last, designed with steel friction pads, opposed to wearable fibrous type.

Hardened steel, heatproof bearings with side shields prevent moisture and corrosion.

Made of polypropylene, resist damage caused by rocks and shells.  Diameter : 7-1/4" Pitch:    6  Blades:  3

Hardened chromoly steel, solid 7 mm splined shafts on both ends for precision connection to the lower gear prop and clutch housing.

Coil specifically designed to emit high voltage to the spark plug, which allows for easy engine starting.

Heavy steel gauge, glass packed, internal double noise dampening plate baffles, designed to improve annoying tinning muffler sound often found on 2 and 4 stroke air cooled engines.

We’ve included a plastic baffle between the carburetor air intake and air filter cover, this reduces engine noise and helps in preventing moisture from entering gas chamber and fouling spark plug.

Engine is equipped with additional cooling fins on the fly wheel to further dissipate heat from the cylinder head allowing the engine to run cooler.

Built with a safety release valve when closed, it also allows for secure transport, preventing accidental spills. Capacity - 27oz.

Packed with waterproof marine grease in place of gear oil, this allows it last for the life of the outboard, without replacement or maintenance.

Outer housing and gear case are made of aluminum and are powdered coated to withstand salt and brackish waters.

Solid chromoly shaft is supported by five bushings to minimize vibration, warping, lashing as well as wear and tear.

Strong lightweight universal mount, allows for tilt and trim as well as height adjustment for running in shallow water.*

*Custom extended shafts, are available upon request, at additional costs.

Outboard is shipped 98% assembled, and includes a tool kit.

 


Email Questions To: Sales@SailboatsToGo.com